IC Laser Marking
IC is a circuit module that integrates a variety of electronic components on a silicon board to achieve a specific function. For identification or other functions, there will be some patterns and numbers on the surface of the chip, but the chip is small in size and high in integration density, so the precision of the surface of the chip is very high.
The laser marking machine technology is a non-contact processing method, which uses the thermal effect of the laser to ablate the surface material of the object to leave a permanent mark. Compared with the traditional electrochemical, silk screen, mechanical and other marking methods, it is pollution-free and fast. It can mark clear text, model, manufacturer and other information without damaging the components.
Wafer Laser Marking
A laser is used to print the lot number (such as ABC1234) of the wafer directly above the wafer to ensure the traceability of the entire process chain. This lot number is arranged by many recessed holes, a byproduct of marking It will accumulate around the pits. Excessive or hard protrusions may scratch the surface of the wafer in the later process and cause the wafer to be scrapped. Ultraviolet laser processing is a cold processing method that can better solve the problem of accumulation. It is an ideal wafer marking program.
Wafer Laser Dicing
With the improvement of wafer manufacturing process and the application of carbon powder materials, the hardness of wafers has become higher and higher, and the requirements for processing have become higher. The application of laser dicing technology has solved this problem well.
The laser stealth dicing technology is a brand-new laser cutting process, which has many advantages such as fast cutting speed, no dust, no loss, small cutting path required, and complete dry process.
The main principle of stealth cutting is to focus the short pulse laser beam through the surface of the material and focus it in the middle of the material to form a modified layer in the middle of the material, and then separate the chips by external pressure.